BioBalance PEMF System (Updated!)
The BioBalance Home PEMF System is a full body pulsed magnetic therapy wellness system.
With the BioBalance System you'll get the BioBalance control unit, the full body mat, the pillow pad and power adapter.
BioBalance is a medium intensity pulsed magnetic system with a wide frequency range that spans up to 1,000 Hz.
The BioBalance system has 6 distinct programs which cover a range of pulse frequencies from 0.5 Hz to 1000 Hz. The programs are called "Balance", "Alert", and "Relax", "Sleep", "Recovery", and "Sweep". Each program runs brain entrainment frequency pulses in the range between .5 Hz to 23 Hz along with background frequencies from 300 Hz to 1,000 Hz.
The maximum intensity of the BioBalance is 10 Gauss (1000 micro Tesla) on the pillow pad and 10 Gauss (1000 micro Tesla) on the full body mat (recently updated for higher intensity). The intensity is adjustable in 10% increments from 10% to 100% and in 1% increments from 1-10% for precisely adjusting the low intensity settings. Multiple applicators can be used simultaneously without power loss.
The session times on the BioBalance is adjustable from 10 minutes to 12 hours. This allows the BioBalance to be used as an overnight, sleep aid.
The internal software for the BioBalance can be updated with the USB port on the back with help from support at HealthHarmonic.com
The BioBalance runs a sinusoidal waveform.
Max Intensity: 10 Gauss (1000 micro Tesla)
Max Intensity on Mat: 10 Gauss (1000 micro Tesla)
Frequency Range: 0.5-1000 Hz
Dimensions: 9" x 7" x 2.5"
Mat Dimensions: 68" x 23"
Pillow Pad: 20" x 14"
Warranty Control Unit: 3 years
Warranty Accessories: 1 year
Return Period: 30 days (call us if you'd prefer a rental before purchase)
Restocking Fee: $250
Input Power: 100 - 240 VAC
Here's a comparison with a couple of
our competitor's PEMF systems
BioBalance
Investment: $2,590
Includes: Control unit, full-body mat, pad
Rental Cost: $200/month
Rental Deposit: $400
Money Back Guarantee: 30 days / $250 return charge
Factory Warranty: 3 years
US Support and Service Facility: Yes
Operates on: Battery and AC
Intensity Range: 10-1000 µTesla
(0.1-10 Gauss)
Frequency Range: 0.5-1000 Hz
Waveform: Broadband Sinusoidal
Number of Coils: 21 copper coils
Mat Cover Material: synthetic leather
Storage: Mat folds into thirds. Storage bag included
(0.027 – 0.45 Gauss)
Another related product...
FlexPulse G2 PEMF System
The FlexPulse G2 System includes the battery powered FlexPulse Controller w/belt clip, two coil applicator pads, a battery charger, a magnetic field tester and a protective travel case.
When you operate the FlexPulse G2 system you choose between 6 different programs for different effects.
Program 1 Runs 3 Hz
Program 2 Runs 7.8 Hz
Program 3 Runs 10 Hz
Program 4 Runs 14 Hz
Program 5 Runs 23 Hz
Program 6 Runs 40 Hz
Program 7 Runs 50 Hz
Program 8 Runs 60 Hz
Program 9 Runs 10 Hz and 100 Hz
Program 10 Runs 999 Hz
You can choose between using either one or two applicator coils when you run the FlexPulse G2, when running two coils the power is split between the two coils. The maximum field intensity when running a single coil is 200 Gauss (20,000 micro Tesla). When running two coils the maximum intensity for each coil will thus be 100 Gauss.
The intensity of the FlexPulse G2 is adjustable in ten increments so if you are running both applicator coils you can adjust the intensity between 10 Gauss (1000 micro Tesla) and 100 Gauss at the max intensity. When using only one applicator coil the intensity is double.
The timer on the FlexPulse G2 can be set anywhere from 10 to 60 minutes or it can be run in continuous mode.
The FlexPulse G2 runs a trapezoidal waveform.
Max Intensity: 200 Gauss (20,000 micro Tesla)
Frequency Range: 3-1000 Hz
Dimensions: 4.5" x 2.5" x 1"
Coil Dimensions: 2" x 2.5"
Warranty: 2 years (control unit) 6 months (accessories)
Return Period: 30 days
Restocking Fee: $100
Replacement Coils: $40 (call us to order)